Cybex 770T Treadmill - Manual (Page 22)

Cybex Owner’s Manual
22
Do not pinch or damage display cable when installing console assembly.
Two people are required for the following two steps.
2. Insert the display cable into the top of the right upright until it exits the hole at the base of the
right upright.
1
2
Item Description
1 Insert display cable here
2 Hole
3. Place the console assembly in position on the bolts installed in step 1 in the left and right
uprights.
4. Thread six bolts into the remaining holes of the right upright and left upright.
3
2
1
Item Description
1 2 Console
2 4 Upright (Right shown)
3 15 Bolt
5. Tighten all of the bolts using a 7/32” Allen wrench and 9/16” open end wrench.