Remove access cover – Cybex 770A Arc Trainer User Manual
Page 78
78
Cybex Owner’s Manual
Remove Access Cover
1. Remove the two lower screws securing the access cover using a Phillips screwdriver.
Lower Screws (2)
Access
Cover
Upper Screws (2)
2. Remove two upper screws securing the access cover using a Phillips screwdriver. Refer to the
above diagram.
3. Remove the access cover.
WARNING: Serious injury or death can occur. To avoid injury or death the following
procedure must be followed. Wait until flywheel cools before servicing. A hot
flywheel may burn user.
This manual is related to the following products: