Cybex 770A Arc Trainer - Manual (Page 70)

70
Cybex Owner’s Manual
Quick Operation Guide
Maximum user weight is 400 lbs. (181 kg).
The following is a quick overview of the operation of the unit. For more information read Detailed
Operation Guide in this chapter.
1. Verify foot plates are completely stopped.
2. Grasp handrail and step carefully onto foot plates. Begin striding.
3. Tap QUICK START on the CardioTouch screen. The CardioTouch screen will display “Starting”
and enter Active Mode.
4. Begin striding.
5. Press the Incline ▲▼ keys to change the incline at any time. The left display will show incline.
6. Press the Resistance + – keys to change the resistance at any time. The right display will
show the current resistance.
7. Press the STOP key at any time to pause.
Detailed Operation Guide
Maximum user weight is 400 lbs. (181 kg).
1. Plug the optional power cord and E3 View Monitor power cord (E3 View Monitor units only)
into a power outlet from a grounded circuit, See Electrical Requirements. Coil up the
remainder of the power cord and place it out of the way. The control panel will light up and be
in the Dormant Mode.
2. Verify foot plates are completely stopped.
3. Grasp handrail and step carefully onto foot plates. Begin striding.
4. Select QUICK START or WORKOUTS.
To select a workout category, tap one of the workout category icons from the workout options screen.