Contemporary Control Systems BASremote User Manual (firmware 3.1.x) - Manual (Page 70)

TD040300-0MF
70
You can also print a report of your project. To do this, click the View Documented
Project button in the upper-right portion of Figure 46. In response to your click, a new
worksheet opens to display the most important parameters of the project that was just
built. Unlike the CSV file of Figure 48 which has parameters sequenced for proper
mapping, the sample Documented Project of Figure 49 has parameters displayed in a
sequence more meaningful to humans. As shown below, typical Print Preview and Print
functions have their respective buttons on the left of the screen.
Figure 49 — Sample Documented Project for Printing
7.5.3.3 Loading Your Project into the BAS Remote
Once your bas_cfg.csv file is ready, use an FTP client to copy it to the BAS Remote in
the following directory:
/data/config/
The User Name is admin and the Password is ctrlink. Once the bas_cfg.csv file has
been copied to the BAS Remote, reboot the unit to implement your mapping scheme.