Contemporary Control Systems BASremote User Manual (firmware 3.1.x) - Manual (Page 56)

TD040300-0MF
56
7.2.7.5 DM-DDB Device Management
— Dynamic Device Binding — B
The BAS Remote functioning as the B device provides information about its device attributes and
responds to requests to identify itself.
BACnet Service Initiate Execute
Who-Is X
I-Am X
7.2.7.6 DM-DOB-B Device Management — Dynamic Object Binding — B
The BAS Remote functioning as the B device provides address information about its objects upon request.
BACnet Service Initiate Execute
Who-Has X
I-Have X
7.2.7.7 DM-DCC-B Device Management — Device Communication Control — B
The BAS Remote functions as a B device and responds to communication control exercised by an A device.
BACnet Service Initiate Execute
DeviceCommunicationControl X
7.2.7.8 DM-TS-B Device Management
— Time Synchronization – B
The BAS Remote functions as a B device and interprets time synchronization messages from the A device.
BACnet Service Initiate Execute
TimeSynchronization X
Time Synchronization can set the Time and Date within the BAS Remote Master.
Before these parameters are set with this service (or through the Set Time Screen in
Section 6.8), the Time Set virtual object (instance 910001) will be false. Once these
parameters are set, the Time Set virtual object will be true.