Contemporary Control Systems BASremote User Manual (firmware 3.1.x) - Manual (Page 35)

TD040300-0MF
35
6.1.4 Web Server Screen Overview
From the Web Server Screen (Figure 21) you can configure all I/O channels, view their
status or force them as part of a commissioning process. (The figure uses the Master unit
as an example, but the Expansion unit appears very similar and functions the same.)
Immediately beneath the right side of the banner, the following links are displayed:
Help displays a new window (Figure 23) with context-sensitive information.
Visit Our Website links to our WWW home page for further helpful information.
Figure 21 — Web Server Page
The Configure Settings button (just below the device image) provides access to the basic
device configuration fields already discussed (Figure 17).
The BAS Remote image includes graphic representations of each I/O Channel. Each of the
8 channels has two icons (
and ) that open additional windows used for configuring
or forcing each Channel. The use of these links is discussed in Section 6.3.