Contemporary Control Systems BASremote User Manual (firmware 3.1.x) - Manual (Page 13)

TD040300-0MF
13
3.9 Field Connections
Terminal Power — Master Module* Power — Expansion Module
HI High AC or DC + High AC or DC +
COM AC or DC common AC or DC common
Earth Optional earthing connection No connection
* BASR-M model only
3.10 Ordering Information
Model Description
BASR-8M BAS Remote Master with eight I/O points
BASR-8X BAS Remote Expansion with eight I/O points
BASR-8M/P BAS Remote Master PoE with eight I/O points
Terminal Universal I/Os 1 – 3
I/O 1 A Universal I/O point 1 high
I/O 1 B Universal I/O point 1 low
I/O 2 A Universal I/O point 2 high
I/O 2 B Universal I/O point 2 low
I/O 3 A Universal I/O point 3 high
I/O 3 B Universal I/O point 3 low
Terminal Universal I/Os 4 – 6
I/O 4 A Universal I/O point 4 high
I/O 4 B Universal I/O point 4 low
I/O 5 A Universal I/O point 5 high
I/O 5 B Universal I/O point 5 low
I/O 6 A Universal I/O point 6 high
I/O 6 B Universal I/O point 6 low
Terminal Relay Outputs
OUT 8 NC Output 8 normally-closed contact
OUT 8 C Output 8 common
OUT 8 NO Output 8 normally-open contact
OUT 7 NC Output 8 normally-closed contact
OUT 7 C Output 8 common
OUT 7 NO Output 8 normally-open contact
Terminal +24 VDC @ 150 mA Loop Supply
1 +24 VDC
2 +24 VDC
3 +24 VDC
4 +24 VDC
5 +24 VDC
6 +24 VDC
Terminal Expansion Ports — Master Module Terminal Expansion Ports — Expansion Module
MB-D+ Modbus Serial Bus positive terminal UP-D+ Upstream Expansion positive terminal
MB-D
– Modbus Serial Bus negative terminal UP-D – Upstream Expansion negative terminal
SC Modbus signal common SC Not used
DN-D+ Downstream Expansion positive terminal DN-D+ Downstream Expansion positive terminal
DN-D – Downstream Expansion negative terminal DN-D – Downstream Expansion negative terminal