Contemporary Control Systems BASremote User Manual (firmware 3.1.x) - Manual (Page 54)

TD040300-0MF
54
7.2.5 Binary Input
7.2.6 Binary Output
Property Identifier Property Datatype Code Remarks
Object_Identifier BACnetObjectIdentifier R
Object_Name CharacterString R
Object_Type BACnetObjectType R
Present_Value BACnetBinaryPV W
Status_Flags BACnetStatusFlags R Status flags will display the status of the channel fault =
false for normal conditions. Overridden = false if the
channel is not forced.
Event_State BACnetEventState R Always normal. Check status flags for real condition.
Out_Of_Service BOOLEAN R
Polarity BACnetPolarity R
BAS Remotes comply with the BACnet Application Specific Controller (B-ASC) profile of the six
possible standardized BACnet devices. A B-ASC device can do the following:
Data Sharing

Ability to provide the values of any of its BACnet objects

Ability to allow modification of some or all of its BACnet objects by another device
Alarm and Event Management

No requirement
Scheduling

No requirement
Trending

No requirement
Device and Network Management

Ability to respond to queries about its status

Ability to respond to request for information about any of its objects

Ability to respond to communication control messages
Property Identifier Property Datatype Code Remarks
Object_Identifier BACnetObjectIdentifier R
Object_Name CharacterString R
Object_Type BACnetObjectType R
Present_Value BACnetBinaryPV R
Status_Flags BACnetStatusFlags R Status flags will display the status of the channel fault =
false for normal conditions. Overridden = false if the
channel is not forced.
Event_State BACnetEventState R Always normal. Check status flags for real condition.
Out_Of_Service BOOLEAN R/W
Polarity BACnetPolarity R