Contemporary Control Systems BASremote User Manual (firmware 3.1.x) - Manual (Page 29)

TD040300-0MF
29
Figure 14 suggests an IP address for the PC of 192.168.92.69, but the final quad of the
address could be any value from 1 to 254
— except for 68 which is used by the Master.
After the IP address of the PC has been set to the same LAN as the Master, a browser
can access the Master
’s default IP address. The Master does not support DHCP.
Figure 15 displays just the relevant upper portion of the screen that appears when you
access the Master
. Just beneath the device image is a link named “Configure Settings”.
Clicking this link opens another window where you can configure the values discussed
in the next four sections (see Figures 17
–20).
Figure 15 — Master Main Page (Partial View)
Figure 16
— Expansion Main Screen (Partial View)
Figure 16 displays a view of a main screen (for one of three Expansion units) that is
faded
— except for those elements that differ from the Master screen.