Comtech EF Data HPOD - Manual (Page 54)

HPOD C, X-, or Ku-Band High-Power Outdoor Amplifier MN/HPOD.IOM
Ethernet-based Remote Product Management Revision 8
4–6
Examples of login and remote command/query execution, when using HyperTerminal as the
Telnet interface, appear as follows:
4.5 HPOD Web Server (HTTP) Interface
A user-supplied web browser allows the full monitor and control (M&C) of the HPOD from its
embedded Web Server Interface. This application is designed for, and works best with,
Microsoft’s Internet Explorer Version 5.5 or higher.
4.5.1 Enable the Web Server Interface
Follow these steps to enable the HPOD Web Server Interface using only a 10/100BaseT remote
interface and a Microsoft Windows operating system.
1) Select Start, then Run, then type “cmd” to open the command prompt window:
2) Start a Telnet session with the unit at the default IP address of 192.168.1.4: