Comtech EF Data CRS-311 - Manual (Page 48)

CRS-311 1:1 Redundancy Switch Revision 7
Installation MN/CRS311.IOM
2–6
2.2.2 Installing the Modem Optional Side-Mounting Bearingless Rack Slide
Set
The optional FP/SL0006 Bearingless Rack Slide Set may be installed into the equipment rack
cabinet and onto the sides of each CDM‐Qx/QxL or SLM‐5650/A as shown in Figure 2‐4 and per
the following procedure:
Step Task
1
Use the provided mounting hardware to install one slide onto each side of the modem
chassis.
2
Use the provided mounting hardware to install the slide rail components into each interior
side of the equipment rack cabinet.
3
Mount the unit into the front of the equipment rack. Ensure that the slides properly engage
the cabinet-mounted slide rails.
4
Continue to slide the modem into the equipment rack to its final operating position. Then,
use four user-provided screws to secure the modem to the equipment rack’s right and left
threaded front mounting rails (through the front panel mounting slots).
CEFD Part Number Description
FP/SL0006 Bearingless Rack Slide Set – 26”
Figure 2-4. Installing the Modem Optional Bearingless Rack Slide Set