Compuprint 4247-L03 - Manual (Page 94)

How to Handle the Paper Parking
According to the setting of the TEAR item in the Program Setup, the paper parking
procedure is performed in different ways. See the following description:
If TEAR NO is selected:
v When the paper is positioned at the first
printable line and the paper path is
changed (changing the Macro or pressing
the PATH key) or the PARK key is
pressed, the printer automatically performs
the parking procedure.
v If at least one line has been printed, or the
paper has been fed forward at least 1 line
and the paper path is changed (changing
the Macro or pressing the PATH key) or
the PARK key is pressed, the display
shows TEAR IF NECESS./PARK PAPER.
If the paper to be parked is longer than
18" tear it off and press the PARK key
again to perform the parking procedure.
TEAR NO
PARKING
PARKING TEAR IF NECESS.
PARK PAPER
1st printable line Other paper position
MACRO or
PATH or
PARK
PARK
HC0UG040
MACRO or
PATH or
PARK
Figure 31. Tear No Options Path
82 User's Guide