Power switch in the i position (on) – Compuprint 4247-L03 User Manual
Page 29
4.
If you need to turn the printer on, press the power switch in the I position
(ON).
Attention:
If, for any reason, the Controller Board was not correctly installed in
the printer, the printer will not work and the following audio/visual symptoms
will occur:
v
The buzzer sounds continuously
v
The Operator Panel display is partially filled with solid black boxes
v
The Operator Panel LEDs are all lit.
If this is the case, power off the printer, re-seat the Controller Board, and power
the printer on again.
HC0UG021
Figure 16. Power switch in the I position (ON)
Chapter 2. Setting Up Your Printer
17