Compuprint 4247-L03 - Manual (Page 41)

Printer Setups
The main printer setup parameters can be selected via the operator panel. The
setup parameters are divided into two printer setups, the Power-On Configuration,
that allows a complete configuration at installation time according to the hardware
and the emulation types, and the Program Setup, that allows you to set the
functions that are the most useful in your daily job. These settings can be selected
when the printer is online without printing or offline (ON LINE indicator unlit)
and stored in the Non-Volatile Memory (NVM).
Entering the Printer Setups
v Press the PROGRAM key and keep it pressed at the printer power on until the
RELEASE KEY message is displayed to select the Power-On Configuration.
v Press the PROGRAM key when the printer is online without printing or offline
(ON LINE indicator unlit) to select the Program Setup.
Moving within the Printer Setups
The arrow keys , , , are used to move within the different functions inside
the Printer Setups. See the following description of the setup items.
Leaving the Printer Setups
v Pressing the PROGRAM in the Power-On Configuration key the printer exits from
the setup and the new settings will be automatically saved.
v Pressing the PROGRAM key in the Program Setup, the following choice is offered
for the storage of the values set:
STORE? QUIT The new settings are not activated and the old settings remain valid.
STORE? SAVE The new settings are stored permanently in the NVM.
STORE? CURRENT The new settings remain valid until the printer is turned off.
Press the or keys to scan these selections forward and backwards. When the
desired setting is displayed, press the PROGRAM key to exit from the Setup.
Chapter 3. Configuring the Printer 29