Compuprint 4247-L03 - Manual (Page 38)

PROGRAM Key
Table 2. PROGRAM Key
PROGRAM Normal
Function Enables the printer setups as follows:
v Pressing this key while powering on the printer, the
Power-On Configuration is selected.
v Pressing this key when the printer is enabled without
printing or disabled the Program Setup is enabled
(PROGRAM indicator lit).
Program
Function Exits the printer setups.
MACRO Key
Table 3. MACRO Key
MACRO Normal
Function Selects one of the user macros (Macro 1, Macro 2, Macro 3 or
Macro 4). If you want to select the displayed macro, wait for
2 seconds without pressing any key and the parameters of
this macro will be set.
Program
Function Scrolls the parameters of the functions or macros forwards.
FONT Key
Table 4. FONT Key
FONT Normal
Function Selects the font to be used with the currently selected pitch.
The selected font is valid until the printer is turned off or a
new font is selected using this key.
Program
Function Scrolls the parameters of the functions or macros backwards.
Note: If the selected emulation for the 4247-L03 printer is Epson LQ1600K, and the DBCS
feature is installed, the FONT Key has the following additional options for DBCS fonts:
Draft, Best Draft, NLQ, and LQ.
LF Key
Table 5. LF Key
LF Normal
Function Performs a line feed according to the current line spacing
settings.
MICRO
FEED Alternate
Function Moves the paper forward in microsteps. Keeping the key
pressed the paper is moved continuously at increasing
speed.
Program
Function Scrolls the setup and macro functions backwards.
26 User's Guide