Opening the push tractors cover – Compuprint 4247-L03 User Manual
Page 124
Loading Paper Using the Front2 Push Tractor (option)
1.
To select the Front2 push tractor paper path press the PATH key until the
display shows:
LOAD FRONT2
v
If you have been using a different path, the display shows:
PATH CHANGING
v
If you have been using fanfold paper in the Front1 push tractor paper path,
the printer automatically starts the parking procedure. The display shows
alternately.
TEAR IF NECESS.
and
PARK PAPER
v
Tear off the fanfold loaded with the Front1 push tractor (if it is longer than
18 inches) and press the PARK key. The display shows:
PATH CHANGING
followed by
LOAD FRONT2
2.
Open the Push tractors cover turning it upwards and lay it on the top of the
printer.
HC0UG069
Figure 55. Opening the Push tractors cover
112
User's Guide