Compuprint 4247-L03 User Manual

Page 89

Selecting Another Macro:

MACRO

MFG NO

NEXT MACRO? NO

NEXT MACRO? YES

CONFIG MENU NO

MACRO#1

To pass over to another macro, select NEXT MACRO YES. Pressing the

key

the item MACRO#1 is displayed, then press the

key to pass over to MACRO#2

(MACRO CHANGING is displayed).

When passing over from one macro to another, the fanfold paper loaded from the paper

path, selected in the previous macro, will be automatically parked (TEAR IF

NECESS/PARK PAPER is displayed). Tear off this fanfold paper and press PARK key.

You can now set the parameters for MACRO#2 as described above. In this way
you prepare the second printing environment. Passing over from one macro to the
other then sets two different printing environments.

Passing over to the Power-On Configuration:

At this point of the setup, it is

possible to pass over to the Power On Configuration functions setting.

NEXT MACRO NO

CONFIG MENU NO

CONFIG MENU YES

HEX DUMP NO

EMUL. OPTIONS

These items are self-explaining.

Hexadecimal Dump:

CONFIG MENU NO

HEX DUMP NO

HEX DUMP YES

STORE? QUIT

If you select HEX DUMP YES, press the PROGRAM key to set this item. The
hexadecimal printing continues, until the HEX DUMP NO item is selected,
entering again into the Program Setup.

Chapter 3. Configuring the Printer