BECKHOFF AX2500 - Manual (Page 79)

If communication works, the drive selection screen appears:
The master and axis modules, recognized in the sys-
tem, with its station address and name are listed. The
master module is separately characterized.
Doubleclick on the amplifier, which you want to work
with.
You can select additional other axis modules later to
show them in parallel at the screen and parameterize
them (Multidrive function).
Now parameters are transmitted from the servoamplifier to the computer. Then you see
the start screen.
Make sure, that the amplifier is disabled (Input HW-Enable connector X1 pin 3 must
be 0 V or open)!
9.3.3 Important Screen Elements
Help Function
In der Online-Hilfe finden Sie detaillierte Informationen zu allen Parametern, die vom
Servoverstärker verarbeitet werden können.
Key F1 Starts Online Help for the actual screen page.
Menu Bar ? /
Online HTML Help
Starts Online Help with table of contents.
Tool Bar
Save to EEPROM,
required if you changed parameters.
Reset (coldstart),
required if you changed important configuration parameters.
Operation Mode, use Digital Velocity mode for drive testing.
Disable and Enable of the amplifier's output stage via soft-
ware.
Status Bar
AX2500 Product Manual 79
BECKHOFF
06/2007
Setup