BECKHOFF AX2500 - Manual (Page 76)

9.3 Quickstart, drive test
9.3.1 Preparation
9.3.1.1 Unpacking, Mounting and Wiring the Servo Amplifier
1. Unpack servo amplifier and accessories
2. Observe safety instructions in the manuals
3. Mount the servo amplifier as described in chapter 7.3
4. Wire the servo amplifier as described in chapter 8.3 or apply the minimum wiring for
drive testing as described in chapter 9.3.1.3
5. Install the software as described in chapter 9.2
9.3.1.2 Documents
You need access to these documents (located on the product CD-ROM, you can down-
load the latest editions from our website):
l Product Manual (this manual)
Depending on the installed fieldbus interface you need one of these documents:
l CANopen Communication Profile Manual
l PROFIBUS DP Communication Profile Manual
l SERCOS Communication Profile Manual
l EtherCat Communication Profile Manual (in process)
You need Acrobat Reader to read the PDFs, an installation link is on every screen of the
product CD-ROM.
76 AX2500 Product Manual
Setup
06/2007
BECKHOFF