BECKHOFF AX5805 Installation - Manual (Page 16)

Product description
14 AX5805
3.4 Installation
3.4.1 Safety instructions
Before installing and commissioning the TwinSAFE drive option cards, refer to the safety instructions in the
Foreword of this User Manual (Chapter 1).
3.4.2 Transport and storage
For storage and transport of the digital TwinSAFE Drive option cards, use the original packaging in which
they were delivered.
CAUTION
Adhering to the specified environmental conditions
The user must ensure that the TwinSAFE option card is only transported, stored and
operated under the conditions specified in technical data.
3.4.3 Installation of the AX5805
DANGER
Remove power prior to installation
The servo drive must be disconnected from the mains and system voltage before installing
the TwinSAFE drive option card. Even when the AX5000 is disconnected from the mains
voltage, dangerous voltage continues to be present at the X02 terminals of the DC link for
at least 5 minutes. Wait until the DC link capacitors are discharged before touching live
terminals
3.4.3.1 Installation requirements
The AX5805 can be used only in servo drives AX5xxx-0000-x2xx.
Attention
Risk of property damage
Attempting to install the AX5805 into AX5000 servo drives of a previous version can cause
irreparable damage to the AX5000.