BECKHOFF CP-Link3 - Manual (Page 31)

Page 31
Client Configuration
The configuration of a client is divided into four parts, which are described in detail below:
General - a client's general parameters.
USB - settings for "Virtual USB".
Serial - settings for "Virtual Serial Ports".
Graphics - settings for "Virtual Graphics".
The CP-Link 3 functionalities (Virtual USB, Virtual Serial Ports and Virtual Graphics) can be enabled or disabled
separately for each client. This is either done through the appropriate selection boxes in the client list, or through the
selection box on the corresponding tab in the lower part of the configuration window.
In order to configure one or more clients they must first be selected. This is done simply by clicking them in the client list.
It is also possible to select multiple clients simultaneously. In this case the most recently marked client has a black
background, while the others all have blue backgrounds:
The settings displayed are always those for the most recently marked clients, while changes that are made are carried
out on all the clients that have been selected.
General
BECKHOFF CP-Link 3: Configuration