BECKHOFF CP-Link3 - Manual (Page 19)

Page 19
When installation is complete, a success message will appear. If you finish the installation program, you will be asked to
restart the computer.
Note
Client PC initially not operable
The client PC is initially not operable as long as it waits for a connection with a CP-
Link 3 host. If no host connects with the client, it becomes operable after about one
minute. The client indicates this state with an info box.
Installation under Windows CE
The subfolder "CE\X86" or "CE\ARM" in the program directory on the host PC contains the installation files for Windows
CE based clients.
Note
Windows CE 6 and particular image version required
Please note the requirements listed under System Requirements for the Client with
Windows CE (see the Technical data section).
The corresponding CE-cab installation file needs to be copied to the CE device first (via memory stick / FTP / Public
Folder / ...). Double click the cab file on the CE device to start the installation and follow the instructions of the installation
wizard. In order to ensure correct functioning of CP-Link 3, always install CP-Link 3 into the directory suggested by the
installation wizard. After installation has finished the cab file will be deleted automatically.
Note
Installation directory
In order to ensure correct functioning of CP-Link 3, always install CP-Link 3 into the
directory suggested by the installation wizard.
Note
CE-cab file will be deleted automatically after installation completes
After installation has finished the cab file will be deleted automatically. Therefore you
should always transfer a copy of the original cab file to the client.