BECKHOFF CP-Link3 - Manual (Page 26)

Page 26
Edit the client list
The configuration interface appears with an empty client list the first time that CP-Link 3 Configuration is started:
Clients can be added to the client list by clicking Broadcast Search or on Add Client . Clients can be removed from the
client list with a click on Remove Client .
Note
Activate the settings with Apply
The procedure must be completed by clicking Apply in order to finally write the changes
into the client list.
Broadcast Search
The Broadcast Search function makes it possible to search automatically for devices in the network that are CP-Link 3-
capable. Devices found by the Broadcast Search can be adopted into the client list.
Note
Windows Firewall
If the Windows Firewall is enabled, the UPnP service must be authorized in the
Windows Firewall if automatic searching for CP-Link 3-capable devices is to work.
BECKHOFF CP-Link 3: Configuration