BECKHOFF CP-Link3 - Manual (Page 23)

Page 23
Display Devices
A display device is selected by clicking on a monitor symbol, as can be seen from a light blue border. Similarly, a display
device can also be chosen from the selection list ( Device ) shown on the dialog. The settings for the selected display
device can now be modified in the lower part (Setting) of this dialog. The position of the monitor icons can be adjusted by
drag-and-drop. Clicking Apply will activate the changes.
Installation/uninstallation of CP-Link 3 - Extended Desktop Devices:
In the CP-Link 3 - Extended Desktop Devices area it is possible to enter the number of Extended Desktop Devices that
are to be installed, and the installation can be started by clicking Install additional device(s) . It may be necessary to
restart the operating system after the installation process.
After selecting a CP-Link 3 - Extended Desktop Device the device can be uninstalled by clicking Uninstall selected
device . After the uninstallation process the operating system needs to be restarted.
Note
A maximum of 10 display devices is possible under Windows 7 / Windows XP
The total number of 10 display devices cannot be exceeded, and this includes the
graphics cards installed in hardware, to which one or more display devices, depending
on the type (single or dual head) can be connected. A CP-Link 3 - Extended Desktop
Device corresponds to a single head graphics card, and thus to one display device.
Note
Check the license level
You must be licensed to the appropriate level (Extended-Desktop) in order to
install/uninstall Extended Desktop Devices.
Miscellaneous