Basler Electric BE1-700 Modbus Protocol - Manual (Page 75)

9376700991 Rev D BE1-700 Modbus™ Protocol 3-27
47472 Peak Demand Since Reset Timestamp - day INT
47477 Peak Demand Since Reset Timestamp - day INT
47482 Peak Demand Since Reset Timestamp - day INT
Read only: Any value (days since 01/01/1984)
47463-64 Peak Demand Since Reset Timestamp - millisecond LI
47468-69 Peak Demand Since Reset Timestamp - millisecond LI
47473-74 Peak Demand Since Reset Timestamp - millisecond LI
47478-79 Peak Demand Since Reset Timestamp - millisecond LI
47483-84 Peak Demand Since Reset Timestamp - millisecond LI
Read only: 0 to 86,399,999 milliseconds
47486 Reset Logic Alarm Information SI
47487 Reset Major Alarm Information SI
47488 Reset Minor Alarm Information SI
47489 Reset Relay Alarm Information SI
47491 Clear Fault Log SI
47492 Trigger Fault Record SI
47493 Clear Events Report SI
Read: 0
Write: Any value will perform reset / trigger / clear.
47512 Fault Indicator SI
Read only: Most recent Fault number (1 - 255)
47513 Fault Template Status SI
Read only:
0: Template not valid for current Fault Selection (Refer to Register 40038). All FLT
template values will read 0.
1 to 255: Valid user selected Fault Number.
The following is the Fault Template (RPT):
47514
Fault Date and Time – day INT
Read only: Any value (days since 01/01/1984).
47515-16 Fault Date and Time – milliseconds LI
Read only: 0 to 86,399,999 milliseconds
47517 Fault Event Type BM(16)
Read only:
Bit 0 for Breaker Fail
Bit 1 for Trip
Bit 2 for Logic
Bit 3 for Pickup
Bit 4 for Fault Record Trigger (Refer to Register 47492)
47518 Fault Active Group SI
Read only: 0 to 1
47519 Fault Targets MSBs BM(16)
Read only:
Bit 15 - Spare
Bit 14 - Spare
Bit 13 - Spare
Bit 12 - 51C
Bit 11 - 51B
Bit 10 - 51A
Bit 9 - 150TQ
Bit 8 - 50TQ
Bit 7 - 150TN