beautypg.com

Figure 1-11. dos command shell, Figure 1-12. dos command example with dhcp server – Basler Electric BE1-700 Modbus Protocol User Manual

Page 19

background image

9376700991 Rev D

BE1-700 Modbus™ Protocol

1-9

4) Testing your network can be done from your computer’s DOS command shell. To open a DOS

command shell in Windows®, select the Start RUN Open:

cmd. (Figure 1-11).

Figure 1-11. DOS Command Shell


5) Example

WITH a DHCP server

In the DOS command shell type

ipconfig to see the available networks (

Figure 1-11

):

Figure 1-12. DOS Command Example with DHCP Server

6) Example

WITHOUT a DHCP server

In the DOS command shell type

ipconfig to see the available networks (

Figure 1-13

):

Figure 1-13. DOS Command Example without DHCP Server

After a few minutes (when a DHCP server is not detected) a default IP address with the format

169.254.xxx.xxx address will be reported. (Figure 1-14)

See also other documents in the category Basler Electric Relay: