Avery Dennison SNAP Sonic Knife - Manual (Page 14)

Users Manual Sonic Knife w/500 Installation •••• 14
Installation
Attaching Sonic Knife – AVERY DENNISON 500
STACKER
SONIC KNIFE
POST BRACKET
PAXAR 500
PAXAR 500
FIGURE 1
There are two exit posts on the AVERY DENNISON 500. To attach Sonic Knife to
the AVERY DENNISON 500, slide the Sonic Knife onto the bottom post, using the
post bracket. Adjust the Sonic Knife forward/backward so the web coming from the
printer is centered on the horn face. Connect cables per electrical schematic.