Avery Dennison 7411 Print Server - Manual (Page 77)

LPD/LPR A printer protocol that uses TCP/IP to establish
connections between printers on a network. Also known
as Line Printer Daemon/Line Printer Remote.
MAC Address or
Media Access
Control A hardware address (6-byte) that uniquely identifies each
node of a network. The MAC address is set during
manufacturing and does not change. Also, two Network
Interface Cards (NIC) will not have the same value.
MSCHAPv2
(Challenge
Handshake
Authentication
Protocol) The Microsoft® version of CHAP. It is a three-way
handshake protocol that is more secure than PAP. It
provides mutual authentication between devices.
NIC or
Network Interface
Card An adapter (board or card) that can be inserted into a
device, so the device can be connected to a network. The
NIC converts data from the device into the form transmitted
or received from the network
Node A processing location on a network. The location can be a
workstation, computer, or printer. Each Node has a unique
MAC address.
Open
Authentication This allows any device to authenticate and then attempt to
communicate with the access point. Any wireless device
can authenticate with the access point, but if WEP is used,
the device can communicate only if its WEP keys match the
access point's. There is no challenge that occurs, you
either have the correct key or not when you communicate
with the access point. By eliminating the challenge
process, it actually makes this more secure than shared
key authentication.
PAP (Password
Authentication
Protocol) A simple authentication protocol used with PPP (Point-to-
Point Protocol). It is a plain text password system, which
is not very secure.
Pathname The location of a particular file or directory that includes
the full path to the needed filename or directory. This is a
combination of path and filename.
PEAP (Protected
Extensible
Authentication
Protocol) Authenticates clients into a network using only server-side
certificates, which makes implementing and administering a
wireless LAN easier.
Ping A way to determine if a device is accessible. It sends a
packet to the specified address and waits for a reply.
Protocol This is the way two devices transmit data between each
other, including error checking, data compression, and how
messages start and end.
Glossary G-3