Avery Dennison 7411 Print Server - Manual (Page 38)

SNMP Netware Traps
1. From the Alerts and Traps screen, click SNMP Netware Traps.
2. Enter a community name, IPX address, IPX Node address, and the errors
you want to receive notification for. You can enter up to four IPX
addresses.
3. Click Submit.
4. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
5. Click Submit and wait five seconds for the printer to reset. Even though
you submitted your changes on the previous screen, they do not take
effect until you reset the printer.
You must re-enter your access password to make any further changes to
the printer settings.
4-14 Ethernet Operating Instructions