Avery Dennison 7411 Print Server - Manual (Page 64)

8 0 2 . 1 1 b / g W i r e l e s s C o m m a n d s
In the following commands, EN and NW (network settings) are
interchangeable.
CLear EN SSid
Clears the SSID, so the server connects to any access point.
SET EN
Sets 802.11b/g Wireless Settings.
SET EN APDEN [LOW/MED/HI]
Sets 802.11b/g access point density.
SET EN AUTHtype [OPEN/SHARED/TTLS/LEAP/PEAP/WPA-PSK]
Sets the authentication type. See Chapter 4, “ Using the Web Interface ” for more
information.
SET EN CERTCN
Sets the EAP common name. If no value is set (null), all host certificates are
accepted.
SET EN CERTCN2
Sets the second EAP common name. If no value is set (null), all host certificates
are accepted.
SET EN CERTEXP
Sets the EAP certificate exponent value.
SET EN CERTKEY
Sets the EAP root key value.
SET EN CHannel nn
Sets 802.11b/g wireless channel.
SET EN ENC [DIsable/64/128/WPA/WPA2/WPA2-WPA/
Dynamic WEP]
Sets the encryption mode. See Chapter 4, “ Using the Web Interface ” for more
information.
SET EN ID
Sets the authentication user ID. It may include the realm, separated with the at
(“@”) character.
6-8 Ethernet Operating Instructions