Avery Dennison 7411 Print Server - Manual (Page 33)

You must re-enter your access password to make any further changes to
the printer settings.
C h a n g i n g W i r e l e s s S e t t i n g s
This screen allows you to set your wireless parameters. You can change
modes, specify your SSID, modify your channel (Ad-Hoc mode only), network
speed, access point density, and more. You can also configure network
security. See “
Configuring Network Security ” for more information. Only
configure the settings required for your network/printer.
1. From the side menu, click Wireless.
2. Select your information and click Submit.
3. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
4. Click Submit and wait five seconds for the printer to reset. Even though
you submitted your changes on the previous screen, they do not take
effect until you reset the printer.
Using the Web Interface 4-9