Avery Dennison 7411 Print Server - Manual (Page 62)

SET DEFAULT
Sets print server to factory defaults.
SET LOAD [EN/DI]
Enables or disables firmware reload after exit.
SET LOAD HOst
Sets node name of boot host (NetWare firmware load).
SET LOAD IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load).
SET LOAD SOftware
Sets print server’s firmware filename to load.
SET PAssword
Sets console password. The user is prompted for old password, new password,
and to verify new password. The default password is access.
Note:
The password is case-sensitive.
SET PROTect
Sets the update password.
SET SERVEr DEscription
Sets mode description to string displayed with SHOW SERVER command.
SET SERVEr NAme
Sets server node name.
SET SERVIce [EN/DI]
Enables or disables specified protocol on specified service.
SET SERVIce NAme
Changes service name.
SET SERVIce REceive [EN/DI]
Sets receive only mode on specified service.
SET SERVIce TCP nn
Sets TCP port number of service.
SHow FATal
Shows the fatal error log.
6-6 Ethernet Operating Instructions