Avery Dennison 7411 Print Server - Manual (Page 60)

Syntax: Help set ip
IP LPD/TCP Parameters
ADdress aa.bb.cc.dd
IP node address
ARP [EN/DI] IP set via ARP
BAnner [EN/DI] LPD banner printing
CHKSUM [EN/DI] IP receive checksum
BOot n Number of DHCP/BOOTP tries
ENable/DISable Enable or Disable IP Processing
FTIme [EN/DI] Fast timeout
FTP [EN/DI] FTP protocol
HTTP [EN/DI] HTTP protocol
KEepalive n Keepalive interval (min)
LPD [EN/DI] LPD protocol
MEthod Set method of getting IP address
PIng aa.bb.cc.dd Test connection to IP host
PRObe [EN/DI] TCP connection probes
RANge [EN/DI/ALL] aa.bb.cc.dd {MAx ee.ff.gg.hh}
RARp flags nn 1=no subnet, 2=no router, 3=neither
REtry [EN/DI]
LPD retry continuation
ROuter aa.bb.cc.dd Default router address
SUbnet aa.bb.cc.dd Subnet mask
TCP [EN/DI] Raw TCP (9100) protocol
TELnet [EN/DI] TELNET protocol
TFTP [EN/DI] TFTP protocol
TImeout n Inactivity timeout (minutes)
TRAP n [ADDR/PORT/TRIG] TRAP configuration
WIndow nn LPD/TCP maximum window size
Displays a list of the available help commands for “Set IP.”
6-4 Ethernet Operating Instructions