Avery Dennison 7411 Print Server - Manual (Page 70)

SET IP PRObe [EN/DI]
Enables or disables the TCP connection probe.
SET IP RArp nn
0 Both
1 no subnet
2 no router
3 neither
Default (0) - IP address is set with subnet mask and router that is the same
address as host.
SET IP RANGE [EN/DI/ALL]
Sets the valid range of IP addresses.
SET IP REtry [EN/DI]
Enables or disables LPD retry continuation
SET IP ROuter aa.bb.cc.dd
Sets default Router/Gateway address (or access point).
SET IP SUBnet aa.bb.cc.dd
Sets default subnet mask.
SET SERVIce IP [EN/DI]
Enables or disables TCP/IP jobs on specified service.
SET SERVIce TCP nn
Sets TCP port number (>1023 on service).
SET IP TCP [EN/DI]
Selects whether to use the raw TCP (port 9100) protocol.
SET IP TELNET [EN/DI]
Selects whether to use the Telnet protocol.
SET IP TFTP [EN/DI]
Selects whether to use the TFTP protocol.
SET IP TImeout n
Sets timeout (n) in minutes.
SET IP WIndow nn
Sets the LPD/TCP maximum window size
6-14 Ethernet Operating Instructions