Avery Dennison 7411 Print Server - Manual (Page 35)

2. Click Email Alerts to setup the mail server and select users to receive
messages about the printer’s status.
3. Enter your SMTP server, email address, and the errors you want to
receive notification for. You can enter up to eight email addresses.
4. Click Submit.
5. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
6. Click Submit and wait five seconds for the printer to reset. Even though
you submitted your changes on the previous screen, they do not take
effect until you reset the printer.
You must re-enter your access password to make any further changes to
the printer settings.
Using the Web Interface 4-11