Avery Dennison 6035 Equipment Manual - Manual (Page 78)

T R O U B L E S H O O T I N G
8
This chapter includes information about printer problems and
solutions.
P r o b l e m s a n d S o l u t i o n s
Some common printer problems and their solutions are listed on the
following pages.
Problem Solution
Printer will not feed. Switch to a fully charged handle.
Close the supply cover completely.
Load the supply correctly.
Check the platen roller for jammed labels.
Printer will not print. Switch to a fully charged handle.
Load the supply correctly.
Clean the printhead.
Print has voids or is too
light. Load the supply correctly.
Close the supply cover completely.
Switch to a fully charged handle.
Clean the printhead.
Check the supply for damage or defects.
Printer partially prints on
the supply and fails to
respond to the keypad or
trigger. (A low battery or
recharge message does
not appear on the display.) Switch to a fully charged handle.
Load the supply correctly.
Troubleshooting 8-1 TC6035EZEM Rev. C 10/98