Avery Dennison 6035 Equipment Manual - Manual (Page 16)

L O A D I N G S U P P L I E S
3
The printer uses thermal supplies:
◆ synthetic labels
◆
paper labels and tags
◆
specialty paper.
See Appendix B, "Specifications and Accessories," for available
supply sizes.
There are two methods for loading supplies:
◆ Peel mode is for labels only. Load the supplies in peel
mode when printing in on-demand mode or when printing
and applying labels.
◆
Non-peel mode is for tags, strips of labels, or specialty
paper. Load the supplies in non-peel mode when printing
in continuous mode.
See your System Administrator to find out which
mode you need.
Loading Supplies 3-1 TC6035EZEM Rev. C 10/98