Avery Dennison 6035 Equipment Manual - Manual (Page 75)

4. Scroll with the left arrow until you highlight the stock type you
want: synthetic, paper, or fax. Press e. Two or three
labels (depending on the supply position) are fed and the
motor turns off (unless you choose fax).
If you chose fax in step 4, the procedure ends.
You will see:
Stock Width:
3) 2.0"
5. Scroll with the left arrow until you highlight the stock width
you want: 1.2", 1.5", or 2.0". Press e. You will see:
Stock Length:
X.XX
where X.XX is the calibrated stock length.
6. Use the left arrow to backspace and enter a different stock
length value (if necessary). Press e.
C h e c k i n g H a r d w a r e V e r s i o n I n f o r m a t i o n
To check the version for the print engine board and MCS library:
1. From the Printer menu, scroll with the arrow keys until you
highlight Version. Press e . You will see:
Select item
Print Engine Board
MCS Library
Exit
7-20 Using Diagnostics TC6035EZEM Rev. C 10/98