Avery Dennison 6035 Equipment Manual - Manual (Page 23)

L o a d i n g f o r N o n - P e e l M o d e
Non-peel mode feeds the supply through the printer in one
continuous strip. Use non-peel mode to print strips of labels,
tags, or specialty paper.
To load your supply:
1. Turn the printer on. The printer initializes.
2. Start the application and maneuver to the point where it
prompts you to load the supplies.
3. Press the latch buttons as shown and open the supply cover
completely.
Supply Cover
Latch Button
3-8 Loading Supplies TC6035EZEM Rev. C 10/98