Avery Dennison 6035 Equipment Manual - Manual (Page 62)

C h e c k i n g t h e P r i n t e r
The Printer diagnostic function provides the following selections:
Machine Totals Displays the total amount of supplies printed
in inches or the number of tags printed.
Hardware Test Displays a sub-menu for testing Printing,
Sensors, Printhead, Battery, and Motor.
Service
Diagnostics Reserved for Service use only.
Calibration Calibrates the loaded supply.
Version Displays versions of print engine board and
MCS library.
To check the printer:
1. At the Main menu, scroll with the arrow keys until you
highlight Printer. Press e . You will see:
Select item
Machine Totals
Hardware Test
Service Diag.
D
2. Scroll with the arrow keys until you highlight the printer test
you want. Press e .
Go to the section you selected for more instructions.
Using Diagnostics 7-7 TC6035EZEM Rev. C 10/98