Cleaning the scanner window 5-3, Scanning tips 5-3, Cleaning the scanner window -3 – Avery Dennison 6035 Equipment Manual User Manual

Page 44: Scanning tips -3

C l e a n i n g t h e S c a n n e r W i n d o w

CAUTION

Do Not use solvents (e.g., alcohol or acetone) or abrasive

cleaners to clean the scanner window.

This will damage the finish.

Clean the scanner window whenever the window appears to be
dirty or smeared.

To clean the scanner window:

1. Moisten a soft cloth with water.

2. Wipe the window until it is completely clean.

S c a n n i n g T i p s

◆

Make sure there are no voids in the bar code symbol.

◆

Hold the scanner four to eight inches from the bar code. Move
the scanner toward and away from the bar code to find the
correct distance for a successful scan.

◆

Aim the scanner at a slight angle to the bar code.

◆

Keep the scanner window clean.

◆

Move to a more dimly lit area if you have several unsuccessful
scans.

◆

Direct sunlight may cause unsuccessful scans.

Using the Laser Scanner 5-3

TC6035EZEM Rev. C 10/98