Avery Dennison 6035 Equipment Manual - Manual (Page 73)

If the printhead value is under 116, do not print anything.
Open the cover and let the printer cool.
If the printhead value is between 117 and 136 (inclusive), you
cannot print strips of labels. Open the cover and let the
printer cool.
Any printhead value greater than or equal to 137 is normal.
The printhead value is not the
temperature in degrees.
2. Press b to exit.
C h e c k i n g t h e B a t t e r y
The Battery test displays the acceptable recharging capacity of
the battery cell.
To run the Battery test:
1. From the Hardware Test sub-menu, press e . You will
see:
Battery = ###
XXX
If the value (which may fluctuate) is greater than 832, the
printer can operate normally. If the value is between 712 and
832 (inclusive), the printer can run but not print. XXX is a
description of the meaning of the value (i.e., Fully Charged).
2. Press b to exit.
7-18 Using Diagnostics TC6035EZEM Rev. C 10/98