Using flash memory, Formatting flash memory, Format_flash – Avery Dennison Monarch 9855 Operator Handbook User Manual
Page 76: Using flash memory -14, Formatting flash memory -14
6-14 Operator's Handbook
U s i n g F l a sh M em o r y
The flash memory options are listed in the table below.
Option
Choices
Default
Form at Flash
No/Yes
No
Unused Flash
NA
NA
Pack Flash
No/Yes
No
Forma tting Flas h Memory
Before storing packets in flash memory, downloading a script, or if the
printer's firmware is updated, you must format the flash memory.
Formatting flash memory is only required once during initial printer
setup.
Note:
When you format flash memory, the script and any downloaded
TrueType® fonts saved in the printer's flash memory are deleted and
must be resent to the printer.
To format flash memory, from the Main Menu, select Setup. Then, follow
these steps.
1. Press or until you see
SETUP
Flash Memory
2. Press Enter/Pause.
FLASH MEMORY
Form at Flash
3. Press Enter/Pause.
Are you sure?
No
4. Press to display "Yes" and press Enter/Pause.