Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 47)

Setting Supply Options 4-13
Setting the Dis pense Position
This function adjusts the stopping point of the label.
To change the setting, from the Main Menu, select Setup, Supply, then
Positioning. Follow these steps.
1. Press  or  until you see
POSITIONING
Dispense Pos 
2. Press Enter/Pause.
DISPENSE POS
[50/200]: +65
3. Press  or  to change the dispense position. Pressing  decreases
the value;  increases it.
4. Press Enter/Pause when the number you need appears. Press
Escape/Clear until you see the Main menu.