Using password protection, Enabling the password (system administrators only), Use_pword_protect – Avery Dennison Monarch 9855 Operator Handbook User Manual
Page 108: Using password protection -4
10-4 Operator's Handbook
U s i n g P a ss w o rd P ro t e ct i o n
The password protection feature prevents formats, graphics or fonts from
accidentally being deleted from the printer's memory. It also limits access to
the Setup and Scripts menus.
Enabling the Pass w ord (S ys tem Ad minis trators onl y)
A System Administrator can enable the password that must be entered
before formats, graphics or fonts can be deleted.
1. From the Main Menu, press or until you see
MAIN MENU
Diagnostics
2. Press Enter/Pause. You will see
Enter Password
_ _ _ _ _ _
3. Enter the password: press Feed/Cut three times and then press
Enter/Pause.
If you enter the wrong password, you return to the Main Menu.
4. From the Diagnostics Menu, press or until you see
DIAGNOSTICS
User Diag
5. Press Enter/Pause. Then, press or until you see
USER DIAG
Password
6. Press Enter/Pause. You will see
Enable Password?
No
The default for password protection is "No," so you will always see
"No" even if passwords are enabled.