Setting the secondary sign, Setting the secondary sign -4 – Avery Dennison Monarch 9855 Operator Handbook User Manual
Page 66

6-4 Operator's Handbook
2. Press Enter/Pause. The current setting is displayed, for example:
MONETARY SIGN
USA
3. Press or until you see the country's monetary sign you want.
4. Press Enter/Pause. Press Escape/Clear until you see the Main menu.
S e t t i n g t h e S e co n d a r y S i g n
If you select USA as the monetary sign, you can print amounts less than
$1.00 either by using a dollar sign and decimal ($0.30) or by using a cent
sign (30¢).
♦
If you set the secondary sign option to No, prices under $1.00 will print
like this: $ .45
♦
If you set the secondary sign option to Yes, prices under $1.00 will print
like this: 45¢
The same option applies to the appropriate secondary sign for monetary
signs other than USA.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press or until you see
DEFAULTS
Secondar y Sign
2. Press Enter/Pause. The current setting is displayed, for example:
SECONDARY SIGN
No
3. Press or until you see the option you want. Then press
Enter/Pause. Press Escape/Clear until you see the Main menu.