Setting the supply position, Setting the supply position -10 – Avery Dennison Monarch 9855 Operator Handbook User Manual
Page 44
4-10 Operator's Handbook
Setting the Supply P osition
This function adjusts the machine to print at the vertical 0,0 point on the
supply.
Note:
The supply position adjustment should only be made on initial
printer setup. For format adjustments, change the print position.
You may need to adjust the supply in or out to allow
♦
tags and labels to be removed.
♦
die cut labels to be removed easily.
The adjustments are in dots (0.0049 inch).
♦
Increase the number to feed more supply out of the chute.
♦
Decrease the number to feed less supply out of the chute.
This option takes effect on the next label or tag printed. Changing supply
position may also affect print position.
To change the setting, from the Main Menu, select Setup, Supply, then
Positioning. Then, follow these steps.
1. Press or until you see
POSITIONING
Supply Pos
2. Press Enter/Pause. The current setting is displayed, for example:
Enter supply pos
[-300/300]: +0
3. Press or to change the supply position. Pressing decreases the
value (feeds less supply);
increases it (feeds more supply).
4. Press Enter/Pause when the number you need appears. Press
Escape/Clear until you see the Main Menu.