Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 71)

Setting Defaults 6-9
D i s ab l i n g I m ag e E rr o r s
You can disable image error reporting. Image errors occur when there is a
problem producing a complete label. You must press Escape/Clear to clear
an image error.
Image errors include
600 unable to im age batch 614 portion of field off label
601 problem during im aging 615 invalid PDF417 bar code data
603 m issing batch 618 invalid font size
611 invalid font, bar code or densit y 620 m issing font data
612 m issing batch data 621 invalid downloaded font
613 reference point off label 622 not enough font m em ory
Note: With this option enabled, the format may not print as expected and
no error is reported. For example, bar codes require a non-print
zone and if a bar code is placed too close to the edge of the label,
no error is reported and the bar code may not scan properly.
Error 616 (bar code dot shifting failed) is always reported.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press  or  until you see
DEFAULTS
 No Image Error 
2. Press Enter/Pause. The current setting is displayed, for example:
NO IMAGE ERRORS
Disabled 
3. Press  or  until you see the option you need. Then press
Enter/Pause.