ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 6)

- 2 -
INSTALLATION
The DMV-PRO may be used in a variety of setups including with mixer channel inserts, mixers with reverb send and
return facilities, and in the effects loop of an instrument or P.A. amplifier. Self-contained in an all-steel, single-height
19” rack-mount enclosure, the DMV-PRO is designed for continuous professional use. Because the unit is compact
and lightweight, mounting location is not critical. However, for greater reliability we recommend that you not place the
DMV-PRO on top of power amps, tube equipment, or other sources of heat.
AC POWER HOOKUP
The DMV-PRO has an external power supply designed to operate at 110 VAC @ 50 to 60 Hz. Units
manufactured for use outside the United States of America have been modified to comply with the required
electrical specifications. Only use the adapter that came with the DMV-PRO. If the adapter becomes lost or
damaged, contact A R T Customer Service for replacement.
AUDIO CONNECTIONS
All audio connections to and from the DMV-PRO are ¼” unbalanced TS (Tip = Hot, Sleeve = Ground). We
recommend using only high-quality shielded cables equipped with high-quality connectors.
SAFETY PRECAUTIONS
Warning: To avoid the risk of shock or fire, do not expose this unit to moisture. Refer all servicing to qualified
personnel. Do not remove the metal covers; there are no user-serviceable parts inside. Only use the power
adapter that came with this unit or one obtained from A R T’s Customer Service Department.