ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 34)

- 30 -
Treble Control
-20
-15
-10
-5
0
5
10
15
20
100 1000 10000 100000
Frequency in Hz (Log Scale)
B
o
o
s
t (d
B
)
MIDI Parameters
Effects can have up to four controller assignments (designated a, b, c, and d) that can modify any of its
parameters in real-time. Each of the four assignments has separate settings for the following parameters: CC
Channel, MIDI CC Number, Parameter, Value Low Range, and Val. High Range. See the tutorial on page 21
for information on setting the controller assignments.
Effect Enabled
This control is available in effect-classes that have a dynamics sensing section. It sets the audio input level
that allows an effect to be heard and can work with signals either above or below a range of +5 to -24 dB (+5
dB = full scale). For example, when this control is set to ”Above -10,” the effect will only be heard when the
signal’s input level is above -10 dB. If set to “Below -10,” then the effect will only be heard when the signal’s
input level is below -10 dB. A value of “Always” is also available to engage the effect regardless of the input
dynamics.